Let’s start with your Canon printer model setup –
The first thing is you have to remove the box packaging and take out the Canon printer model from the box.
The model hardware is packed in plastic, hence take off each tape, plastic and other packaging material.
Make sure the surface where you are placing the printer is clean and close to Pc or laptop.
Check the shipped components with your inkjet printer. For example, setup CD for windows and mac, power cable, Cartridges and manual.
Take the power cable and connect one end to the printer’s power cord in the rear and another end to the power switch to start the Setup.
Press the ON button to turn your printer on.
If you see a stable light, pull the Paper Output Tray and cover.
Install Fine cartridge and ink cartridge, then slide paper guide.
Insert fine, valid blank papers and ensure everything is set up smoothly.
The canon printer model is Setup. Now you’ve to visit ij_start_canon to download the latest printer software to continue further.
Downloading Canon printer drivers and software:
Launch a web browser on your PC or laptop.
Go to the ij_start_canon website.
Click the “Set Up” tab to continue.
Select your Canon inkjet printer model.
Start Canon printer drivers download.
Run the downloaded drivers and software.
Hope You Find This Useful,
Peter
