Автор Тема: https://ij.start.canon | Canon Printer Software Setup Guide  (Прочитано 188 раз)

Оффлайн jaisonroy179

  • Новичок
  • Сообщений: 5
    • E-mail
https://ij.start.canon | Canon Printer Software Setup Guide
« : 19 Апрель 2022, 13:31:40 »
To download, and set up Canon printer setup to your device, visit ij.start.canon. Visit Canon’s official website to learn how to set up the Canon printer drivers and software.


Procedure to Set up Canon Printer for the First Time

In this guide, we’ll assist you via those steps to get your first revealed reproduction the usage of your Canon printer. You can find those instructions at ij.start.canon as well.

•   Take the Canon printer out of its package.
•   Next, search for the guide to make certain you haven’t overlooked anything important.
•   Now, click on the power button to turn it on.
•   Place a chunk of paper in the paper tray.
•   At this point, the printer has to be turned on.
•   Place the cartridges and sheets of paper in the center and output trays, respectively.
•   The printer has now been become on and is ready to use.
•   Turn in your printer and follow the on-screen commands.
•   Decide on a desired language.
•   The printer first prints a take a look at print to configure the grids. This manner the printer decides where to print at the sheet of paper.
•   Check to see if the print fulfills your expectations. If not, cross into the settings and reset the grids.
•   Set the PCB directly to healthy the scanner.
•   Afterward, run the scanning process.
•   Then, at the lowest of the column, click on the Canon support link https://ij.start.canon to download the essential software.
•   In the search bar, kind the call of your printer’s product, or choose the proper printer family from the drop-down menu below ‘choose product.’
•   The model and the serial wide variety of your printer may be found at the front, at the box, and in the guide.
•   Select the operating system you need to put in the printer on, like Windows 10 or macOS, below Drivers.
•   Click on Download.
•   Now you could start using the software.
•   Choose whether you desire to connect with the printer thru Wi-Fi or a printer wire.
•   The software is simple to put in and only takes some minutes.
•   Go for your printer’s Settings, then Device Settings, and finally Wireless LAN Settings.
•   From the drop-down option, select Default Settings or Setup without cable.
•   Give your network a unique call. SSID stands for Service Set Identifier.
•   Then, enter the password to your Wi-Fi network.
•   Click the OK button.
•   Print the primary web page and grasp a printout from the printer.
•   The printer is now configured. Make your first print to get started.


Procedure to Set up Canon Printer Connection Using USB Wire

To set up the connection using USB twine, honestly observe the stairs outlined below:

•   USB wire ports are recognized for getting used to plug USB or Ethernet cables into your device or network router.
•   One built-in Ethernet port connects most devices to a connected network.
•   USB and Ethernet cables aren't the same as those you use to attach your tool.
•   Connect the USB twine to 2 ports in your printer and one on your tool.
•   Now, set up the https://ij.start.canon setup via way of means of following the on-screen steps.



Procedure to Download Canon Printer Drivers

You’ll want drivers and software to your device to run your printer and receive the prints you want to your production. The printing command is sent to the printer by the drivers, who allow printing. Let’s get started.

•   First, turn on each the printer and your tool.
•   Now visit https://ij.start.cannon in your browser.
•   Then, in the Model Number Search bar, type in your model number.
•   Then press the “Go” button.
•   To whole the setup, click on Download and follow the on-display steps.
•   You can find it in the download folder once the procedure is completed.
•   You need to install the Canon Printer drivers, but first, make sure that the printer is connected to the tool.
•   Next, run the setup after opening the setup file in the Downloads folder.
•   Afterward, choose the Install choice and follow the on-screen directions to complete the installation.



Procedure to Install Canon Printer Drivers Through ij.start.canon

To set up a Canon printer driver, comply with the guidelines given here. 

•   Download printer drivers through going to https://ij.start.canon.com and trying to find the version number of your printer.
•   Now, pick your connection kind, pick your connection kind by double-clicking the Canon icon.
•   Then, flip your printer on through clicking the power button to turn in your printer.
•   Afterward, Press the WIFI alarm button to turn at the printer’s Wi-Fi connection.
•   Now, to finish the installation, click on the “I agree” button after reading the Terms and Agree.
•   Finally, to finish the installation, click the Finish button.